  |
Record Player Systems
ATN120E Elliptical
Cartridges
AT120E , AT430E , AT450E , ATDS3 , ATN120E , ATN125LC , ATN130E , ATN130E , ATN135E , ATN140LC , ATN140ML , ATN150E , ATN155LC , ATN160ML , ATN430E , ATN450E , ATPN4 , ATPN5 , ATPN6 , ATN120E Elliptical
|
 |
Record Player Systems
ATN15 Elliptical
Cartridges
AT20SLA , AT20SS , ATN15 , ATN15E , ATN15SS , ATN15XE , ATN20SLA , ATN20SS , ATN22 , ATN23A , ATN24 , ATN25 , ATS15 , ATS20 , ATN15 Elliptical
|
 |
Record Player Systems
ATN110E Elliptical
Cartridges
AT110E , AT110E , AT115E , AT115E , ATN110E , ATN115E , ATN115E , ATN410E , ATN410E , ATN420E , ATN420E , ATN110E Elliptical
|
 |
Record Player Systems
AT6-7D
Cartridges
AT5D , AT5D , AT6 , AT6 , AT6-7D , AT6-7D , AT66-7D , AT6-7D
|
 |
Record Player Systems
ATN3472P
Cartridges
AT101P , AT92E , ATN101P , ATN3472P , ATN3482P , CN5914 , ATN3472P
|
 |
Record Player Systems
Cartridges
AT4-7D , AT4-7D , AT55 , AT55 , AT55-7D , AT55-7D
|
 |
Record Player Systems
ATS11E Ellipitcal
Cartridges
AT2001VE , ATS-11E , ATS-12E , ATS11E , ATS12E , ATS11E Ellipitcal
|
 |
Record Player Systems
ATN51E Original Elliptical
Cartridges
ATN51E , ATN51E , ATN55XE , ATN57XE , ATN59XE , ATN51E Original Elliptical
|
 |
Record Player Systems
AT727 , ATN103
Cartridges
AT727 , ATN103 , SOUNDBURGER , ATN103
|
 |
Record Player Systems
ATN101EP Elliptical
Cartridges
AT101EP , ATN101EP , ATN3472EP , ATN101EP Elliptical
|
 |
Record Player Systems
ATN95E Elliptical
Cartridges
AT95E , AT95E ORIGINAL , ATN95E , ATN95E Elliptical
|
 |
Record Player Systems
VM8-7D
Cartridges
ATS10 , ATS11 , VM8-7D , VM8-7D
|
 |
Record Player Systems
ATN12XE Elliptical
Cartridges
ATN12S , ATN12XE , ATN455EX , ATN12XE Elliptical
|
 |
Record Player Systems
ATN105
Cartridges
AT105 , ATN105 , ATN105
|
 |
Record Player Systems
VM35EL Elliptical
Cartridges
ATS13E , VM35EL , VM35EL Elliptical
|
 |
Record Player Systems
ATN102P
Cartridges
AP132 EP , ATN102P , ATN102P
|
 |
(non refundable item please be carefull when ordering)
Record Player Systems
AT3100/AT3100XE/AT3200 Original Moving
Cartridges
AT3100 , AT3200XE , AT3100/AT3100XE/AT3200 Original Moving
|
 |
Record Player Systems
Cartridges
ATN3830 , ATN3831
|
 |
Record Player Systems
Cartridges
ATN936 , ATN936
|
 |
Record Player Systems
ATN3721 Original
Cartridges
ATN3721 , ATN3721 Original
|
 |
Record Player Systems
Cartridges
AT5-5D , AT5-7D
|
 |
* Shipped with free tracking and insurance. The AT33Mono is made specifically for use on mono systems. It has a horizontal coil, and so in principle only generates electricity horizontally.
The AT33Mono produces sound to a very high quality because it does not easily pick up unnecessary strain components from distorted or scratched records, producing audio that you couldn't possibly get from a stereo cartridge.
The AT33Mono also has appropriate compliance in the vertical direction, so will not cause damage to stereo records. Enjoy those well-known classic mono records of yesteryear with the AT33Mono.
Mono cartridge compatible with stereo playback systems.
Elliptical stylus chip and hard duralumin cantilever.
10Ω middle impedance specification.
PCOCC coil prevents crystal gain boundary formation (in transmission direction).
Strong body stabilized by a rigid body set-up.
"Hanenite" anti-vibration rubber eliminates unnecessary vibrations.
High-quality Sound / Brass fastening screw.
*This Model is not compatible with SP records.
Specifications
Type: MC-Type
Playback frequency range: 20-20,000Hz
Output voltage: 0.35mV (1kHz and 5cm/sec. horizontal signal)
Horizontal/vertical output ratio: 30dB (1kHz)
Output balance: 1.0dB (1kHz)
Stylus pressure: 2.3-2.7g (2.5g standard)
Coil impedance: 10Ω (1kHz)
DC resistance: 10Ω
Load resistance: More than 100Ω (when Head amp connected)
Coil impedance: 28μH (1kHz)
Static compliance: 20×10???6cm/dyne
Dynamic compliance: 6×10???6cm/dyne (100Hz)
Needle shape: Round needle (0.65mil)
Cantilever: Duralumin pipe
Vertical Tracking angle: 23°
Dimensions: H16×W16.6×D26.5mm
Weight: 6.9g
Accessories: Non-magnetic screwdriver x1, Washers x2, Protector x1, Cartridge fasTening screw 13mm×2, 19mm×2, Nut x2, Brush x1, PCOCC lead set x1
Record Player Systems
Cartridges
AT-33MONO MOVING COIL CARTRIDGE
|
 |
* Shipped with free tracking and insurance. The Audio Technica AT-Mono 3/SP cartridge is special – redesigning not just the needle, but the whole cartridge specially for “shellac” or phonograph records. A high output moving coil cartridge of excellent production quality and wound with PCOCC coil for signal purity, it is designed to deliver excellent fidelity and superb clarity when playing 78 RPM mono records. With its high output of 1.2 mV, it can be used without additional pre-amplification or a MC Transformer.
Proven in use for many years in Japan, the Audio-Technica AT-Mono 3/SP cartridge in now available in Europe and helps to bring back the pure joy of discovery and listening pleasure for 78rpm record playing. Specification
Type: Moving Coil, Mono 78 RPM Mono cartridge
Frequency response: 45 - 7,000 Hz
Output voltage: 1.2 mV (1kHz and 5 cm/sec)
Tracking force: 3.0 - 7.0 g (5.0 g standard)
Recommended load: 40Ω - 47KΩ (determine best value by listening)
Channel separation: Not applicable
Channel balance: Not applicable
Cantilever: Aluminum alloy
Stylus: Highly polished special conical 2.5 mil diamond
Dynamic compliance: 7.0 x 10-6 cm/dyne
Static compliance: 20.0 x 10-6 cm/dyne
External size: H16.0 x W16.6 x L26.5 mm
Weight: 6.8 g
Accessories included: Screwdriver, 4 screws, 2 washers and 2 nuts, spacer/weight, stylus brush
Record Player Systems
Cartridges
AT-Mono3/SP Moving Coil 78rpm Cartridge
|
 |
Specifications:
Model Type: Dual Moving Magnet
Frequency Response: 20-20,000Hz
Channel Separation: 20dB at 1 kHz
Tracking force: 1.4-2.5 grams
Load Impedance: 47kΩ
Output: 3.5mVa
Stylus: Elliptical 0.4 x 0.7 mil
Mount: 1/2"
Replacement Stylus:
Record Player Systems
Cartridges
AT95E CARTRIDGE
|
 |
Specifications:
Model Type: Dual Moving Magnet
Frequency Response: 20-20,000 Hz
Channel Separation: 24 dB at 1 kHz
Tracking force: 1.0-1.5 grams
Load Impedance: 47kΩ
Output: 5mV
Stylus: Conical 0.7 mil
Mount: T4P
Record Player Systems
Cartridges
AT3482P T4P CARTRIDGE
|
 |
Record Player Systems
Cartridges
AT91 Cartridge & Styli
|
 |
Record Player Systems
Cartridges
ATS10
|
 |
(non refundable item please be carefull when ordering)
Record Player Systems
TK7EA Original
Cartridges
TK7EA Original
|
|
 |
Record Player Systems
ATN91
Cartridges
2002 , 2003 , 2004 , 2005 , 2006 , 3000 , AT3606 , AT90 , AT91 , AT91 , ATN2001 , ATN3600 , ATN3601 , ATN3606 , ATN90 , ATN91 , ATN91
|
 |
(non refundable item please be carefull when ordering)
Record Player Systems
AT211EP/ATN211EP Original Elliptical
Cartridges
AT201EP , AT201P , AT211EP , AT216EP , AT221EP , AT231LP , AT261 , ATN201EP , ATN201P , ATN216EP , ATN221EP , ATN231LP , ATN261 , AT211EP/ATN211EP Original Elliptical
|
 |
Record Player Systems
AT132EP Elliptical
Cartridges
ATN102EP , ATN112EP , ATN122EP , ATN122LP , ATN132EP , ATN132LP , ATN142LP , ATN152LP , ATN422EP , ATN432EP , AT132EP Elliptical
|
 |
Record Player Systems
ATN3400
Cartridges
AT93 , ATN3400 , ATN3401 , ATN3412 , ATN3450 , ATN93 , ATN93 , CN5440 , ATN3400
|
 |
* Shipped with free tracking and insurance. Audio-Technica AT22 Original Stylus
Output Voltage: 2.2mV
Frequency Response: 5Hz - 35kHz
Tracking Force: 0.8-1.6g
Mass: 8.2g
Channel Separation: > 32db
Channel Balance: < 0.5db
Load Impedance: 47kohms
Output Impedance: 550 ohms
Stylus: ATN-22
Stylus Tip: nude elliptical
Cantilever: beryllium
Dynamic Compliance: 15x10-6cm/Dyne
Used in other Signet cartridges: TK9E, TK9Ea, TK10ML & TKML II
Suits:
AT22
AT23A
AT24 (Discontinued)
AT25 (Discontinued)
ATN22 (Discontinued)
ATN23A (Discontinued)
ATN24 (Discontinued)
ATN25 (Discontinued)
Record Player Systems
Cartridges
AT22 ORIGINAL , AT23a ORIGINAL , AT24 ORIGINAL , AT25 ORIGINAL , ATN22 ORIGINAL , ATN23a ORIGINAL , ATN25 ORIGINAL
|
 |
Record Player Systems
AT770L/HITACHI STD2000 Original
Cartridges
ATN770 , ATN770L , ATN770L ORIGINAL , ATN771L , ATN771L ORIGINAL , AT770L/HITACHI STD2000 Original
|
 |
Record Player Systems
ATN3711
Cartridges
ATN3710 , ATN3710L , ATN3711 , ATN3712 , CN2701 , ATN3711
|
 |
Record Player Systems
ATN70L
Cartridges
ATN70 , ATN70L , ATN71 , ATN72 , ATN70L
|
 |
## CLEARANCE SALE ##
Record Player Systems
ATN3711E Elliptical
Cartridges
3712E , ATN3711E , ATN3712E , ATN3711E Elliptical
|
 |
Record Player Systems
ATN50 Original
Cartridges
ATN50 , ATN51 , ATN51E , ATN50 Original
|
 |
## CLEARANCE SALE ##
Record Player Systems
AT66-7D
Cartridges
AT21-5D , AT66-7D , AT66-7D , AT66-7D
|
 |
Record Player Systems
Cartridges
ATN3400 , ATN3401 , ATN3412 , ATN3450
|
 |
Record Player Systems
ATN13EA Elliptical
Cartridges
ATN13EA , STA1SD , ATN13EA Elliptical
|
 |
Record Player Systems
ATN3651E Elliptical
Cartridges
ATN3651E , ATN3652E , ATN3651E Elliptical
|
 |
Record Player Systems
ATN72E Elliptical
Cartridges
ATN71E , ATN72E , ATN72E Elliptical
|
 |
(non refundable item please be carefull when ordering)
Record Player Systems
Cartridges
AT30E , ATN30E , ATN31E
|
 |
## CLEARANCE SALE ##
Record Player Systems
ATN750
Cartridges
ATN750 , ATN750
|
 |
## CLEARANCE SALE ##
Record Player Systems
Cartridges
AT3-5D , AT3-5D
|
 |
Record Player Systems
Cartridges
ATN952 , ATN952
|
 |
Record Player Systems
Cartridges
AT7-5D , AT7-5D
|
 |
## CLEARANCE SALE ##
Record Player Systems
Cartridges
ATN3851
|
 |
* Shipped with free tracking and insurance. The AT33EV is a ½ inch, standard mount 0.3 x 0.7 mm elliptical cartridge featuring a tapered Duralumin cantilever which reduces the effective mass of the cartridge, resulting in a more durable cantilever. The Dual Moving Coil cartridge design increases channel separation and extends the frequency response range delivering extraordinary audio quality. Internally constructed with a neodymium magnet enhances magnetic energy and PCOCC wire for pure audio transmission.
Elliptical stylus chip and durable duralumin tapered pipe cantilever.
10Ω mid impedance specifications.
Dramatically increased magnetism with neodymium magnets and PCOCC as the coil.
High separation, wide-response Dual moving coil.
VC mold eliminates unnecessary vibrations.
"Hanenite" anti-vibration rubber eliminates unwanted vibrations.
Specifications
Type: MC-Type
Playback frequency range: 15-50,000Hz
Output voltage: 0.3mV (1kHz and 3.54cm/sec.)
Channel separation: 30dB (1kHz)
Output balance: 0.5dB (1kHz)
Stylus pressure: 1.8-2.2g (2.0g standard)
Coil impedance: 10Ω (1kHz)
DC resistance: 10Ω
Load resistance: More than 100Ω (when Head amp connected)
Coil inductance: 22μH (1kHz)
Static compliance: 40×10-6cm/dyne
Dynamic compliance: 10×10-6cm/dyne (100Hz)
Stylus needle shape: Oval???(0.3×0.7mil)
Cantilever: Duralumin tapered pipe
Vertical Tracking angle: 23°
Dimensions: H16×W16.6×D26.5mm
Weight: 6.9g
Accessories: Non-magnetic screwdriver × 1, Washer × 2, Protector × 1, Cartridge installation screws 13 mm × 2 and 19 mm × 2, Nut × 2, Brush × 1, PCOCC lead set
Record Player Systems
Cartridges
AT-33EV MOVING COIL CARTRIDGE
|
 |
Record Player Systems
Cartridges
ATN3663 ORIGINAL
|
 |
Record Player Systems
Cartridges
ATN132LP
|
 |
(non refundable item please be carefull when ordering)
Record Player Systems
Cartridges
ATN312EP ORIGINAL
|
 |
* Shipped with free tracking and insurance.
Type: Moving Coil MC
Frequency response: 15 to 50,000 Hz
Output voltage: 0.4mV 1 kHz, 5 cm/sec.
Channel separation: 30 dB 1 kHz
Channel balance: 0.5 dB 1 kHz
Tracking force: 1.8 to 2.2 g standard: 2.0 g
Coil impedance: 12Ω (1kHz)
DC resistance: 12Ω
Recommended load impedance: Min. 100Ω when Head amplifier is connected
Coil inductance: 25µH 1 kHz
Static compliance: 35 x 10 - 6 cm/dyne
Dynamic compliance: 18 x 10 - 6 cm/dyne 100 Hz
Stylus: Line contact stylus curvature radius: 40 x 7µm
Cantilever: 0.26 mm diameter solid Boron
Vertical Tracking angle: 23 degrees
Dimensions: 17.3H x 16.8W x 25.7L mm
Weight: 8.0 g
Record Player Systems
Cartridges
AT-OC9ML3 MC CARTRIDGE
|
 |
Record Player Systems
Cartridges
ATN1059
|
 |
* Shipped with free tracking and insurance. The New Audio-Technica AT-F7 Stereo cartridge features celebrated Dual coil design and elliptical stylus for class leading quality of Sound and reliability.
The elliptical stylus has two radii, the front radius being wider than the side radius. This allows the stylus to ride in the centre of the groove, while the smaller side radius can more accurately Track higher frequencies.
The Dual coil design of the AT-F7 provides outstanding clarity and Transparency of tone along with improved frequency response and precise Stereo imaging.
Finished in a stylish silver housing.
Type: Moving coil MC
Frequency response: 15 to 50,000 Hz
Output voltage: 0.35 mV 1 kHz, 5cm/sec.
Channel separation: 27 dB 1 kHz
Channel balance: 1.5 dB 1 kHz
Tracking force: 1.8 to 2.2 g standard: 2.0 g
Coil impedance: 12 Ω 1 kHz
DC resistance: 12 Ω
Recommended load impedance: Min. 100Ω when Head amplifier is connected
Coil inductance: 25 μH 1 kHz
Static compliance: 35 × 10 - 6 cm/dyne
Dynamic compliance: 9 × 10 - 6 cm/dyne 100 Hz
Stylus: Nude elliptical stylus 0.2 × 1.7 mil
Suspension wires: Stainless
Vertical Tracking angle: 23 degrees
Dimensions: 17.3 H × 16.8 W × 25.4 L mm
Weight: 5.0 g
Record Player Systems
Cartridges
AT-F7 MC CARTRIDGE
|
|
$115.20 USD 
$102.40 EUR 
$160.00 NZD