Styli for Cartridges record players and catridges

The following lists all styli for Cartridges that we stock. You will probally find it easiest to find your stylus by looking at the pictures below. Otherwise you may view the Record Player / System Index or the Cartridge Index for Cartridges.
Stylus 846Buy Now
$72.32 USD $56.46 EUR $101.00 NZD

The new Stanton 505 SK II is the best budget-priced scratching cartridge available today. The super sturdy stylus has been coupled with the most pumped-up output for the deepest bottom and in-your-face sound.

Spec's
Frequency response: 20 Hz to 17 kHz
Output @ 1 kHz: 6.0mV
Channel separation @ 1 kHz: 27dB
Channel balance @ 1 kHz: within 2dB
Tracking force: 2 to 5 grams
Stylus Tip: Spherical .7 mil special high polish
DC resistance: 535 ohms
Intundance: 400 mH
Cartridge weight: 5.5 grams
Tracking ability: 80µ @ 3 grams
Recommended load: 47k ohms and 275 pF
Replacement Stylus: D5100 SK II

Record Player Systems

Cartridges
505 SK II cartridge


Stylus 823Buy Now
$50.84 USD $39.69 EUR $71.00 NZD

A magnetic cartridge which is ideal as a starter cartridge or as an upgrade on older turntables.

Universal 1/2" mount, screws supplied
Conical stylus (0.6mm)
Tracking force 1.5 - 2.5g
Blister packed
Impedance 47k ohms
Weight 5.8g
Frequency response 20Hz - 20kHz
Output level 3.5mV

Record Player Systems
AT-91 Cartridge (original)
Cartridges



Stylus 995Buy Now
$12.17 USD $9.50 EUR $17.00 NZD

Skytec Headshell which will allow most cartridges to be fitted.
See also 'Cartridge protractor' on front page. Record Player Systems

Cartridges
Skytec Headshell


Stylus 832Buy Now
$149.64 USD $116.83 EUR $209.00 NZD

The Blue and Red models use a four piece OTL cantilever technology, standard oxygen free wire in the coils and Grado's specially designed elliptical diamond mounted on a brass bushing. The Red model is selected from the Blue production run and meet higher test specifications. Approximately 10% of the production run will meet these standards and become Red models.

Frequency Response 10-55
Principal MI
Channel Separation at 1KHz 30. Imput Load
Output at 1KHz 5CM/sec. 5mV
Recommended Tracking Force 1.5
Stylus Type E
Inductance 45mH
Resistance 475
Compliance CUs 20
Stylus Replacement U=user U
Record Player Systems

Cartridges



Stylus 849Buy Now
$121.72 USD $95.03 EUR $170.00 NZD

[PACK 2]
The new Stanton 505 SK II is the best budget-priced scratching cartridge available today. The super sturdy stylus has been coupled with the most pumped-up output for the deepest bottom and in-your-face sound.

Spec's
Frequency response: 20 Hz to 17 kHz
Output @ 1 kHz: 6.0mV
Channel separation @ 1 kHz: 27dB
Channel balance @ 1 kHz: within 2dB
Tracking force: 2 to 5 grams
Stylus Tip: Spherical .7 mil special high polish
DC resistance: 535 ohms
Intundance: 400 mH
Cartridge weight: 5.5 grams
Tracking ability: 80µ @ 3 grams
Recommended load: 47k ohms and 275 pF
Replacement Stylus: D5100 SK II

Record Player Systems
505 SK II cartridge X 2
Cartridges



Stylus 836Buy Now
$214.08 USD $167.14 EUR $299.00 NZD

The Silver and Gold models use a four piece OTL cantilever technology, ultra-high purity long crystal (UHPLC) oxygen free copper wire in the coils and Grado's specially designed elliptical diamond mounted on a brass bushing. The Gold model is selected from the Silver production run and meet higher test specifications. Approximately 5% of the production run meet these standards and become Gold models.

Principal MI
Channel Separation at 1KHz 35
Imput Load 47K
Output at 1KHz 5CM/sec. 5mV
Recommended Tracking Force 1.5
Stylus Type E
Inductance 45mH
Resistance 475
Compliance CUs 20
Stylus Replacement U=user U
Mounting S/P
Weight 5.5
Record Player Systems

Cartridges



Stylus 821Buy Now
$168.98 USD $131.92 EUR $236.00 NZD

This legendary battle needle offers ultra-high skip resistance and ultra-high output. The needle of choice for many champion DJ's worldwide, including The former Invisibl Skratch Piklz, X-ecutioners, and The World Famous Beat Junkies.

Combining Shure's unique wide-diameter Type S cantilever with a tracking force of 1.5 to 3.0 grams, the M44-7's rugged construction is highly durable, but will not unduly wear your vinyl. With a 9.5 mV output, the highest on the market, the M44-7 produces very powerful, resonant sound.

Record Player Systems
Shure M44 7-H DJ Cartridge & Headshell
Cartridges



Stylus 831Buy Now
$113.84 USD $88.88 EUR $159.00 NZD

The Black and Green models use a three piece OTL cantilever technology, standard oxygen free wire in the coils and Grado's specially designed elliptical diamond mounted in a brass bushing. The Green model is selected from the Black production run and meet higher test specifications. Approximately 15% of the production run will meet these standards and become Green models.

Frequency Response 10-50
Principal MI
Channel Separation at 1KHz 30
Imput Load 47K
Output at 1KHz 5CM/sec. 5mV
Recommended Tracking Force 1.5
Stylus Type E
Inductance 45mH
Resistance 475
Compliance CUs 20
Stylus Replacement U=user U
Mounting S/P
Weight 5.5
Record Player Systems

Cartridges



Stylus 837Buy Now
$149.64 USD $116.83 EUR $209.00 NZD

Musically you will find the DJ 100 streaks ahead.The sound is real and has the depth that is associated with all Grado cartridges

Output 4MV@3.54 CMV(45 degrees)
Frequency Response -10-55000 Hz
Channel Separation Average 25DB 10-30
000 Hz Stylus - Diamond-Eliptical
Input Load 47000 Ohms
Pickup Weight 6 grams
Tracking Force 2to 4 grams
Mounting standard screw mount
Non-Sensistive to Capacitive Load
Record Player Systems

Cartridges



Stylus 833Buy Now
$185.44 USD $144.78 EUR $259.00 NZD

The Silver and Gold models use a four piece OTL cantilever technology, ultra-high purity long crystal (UHPLC) oxygen free copper wire in the coils and Grado's specially designed elliptical diamond mounted on a brass bushing. The Gold model is selected from the Silver production run and meet higher test specifications. Approximately 5% of the production run meet these standards and become Gold models.

Frequency Response 10-60
Principal M
I Channel Separation at 1KHz 35
Imput Load 7K
Output at 1KHz 5CM/sec. 5mV
Recommended Tracking Force 1.5
Stylus Type E
Inductance 45mH
Resistance 475 Compliance CUs 20 Stylus Replacement
Mounting S/P
Weight 5.5
Record Player Systems

Cartridges



Stylus 811Buy Now
$121.00 USD $94.47 EUR $169.00 NZD

M44-7 and M44-7-H DJ Record Needles, Turntablist, Scratch

Revived exactly the same as the original, this legendary battle needle offers ultra-high skip resistance and ultra-high output. The needle of choice for many champion DJ's worldwide, including The former Invisibl Skratch Piklz, X-ecutioners, and The World Famous Beat Junkies. Engineered for scratch DJ's and turntablists, the M44-7 is designed not to skip under even the most demanding circumstances.

Combining Shure's unique wide-diameter Type S cantilever with a tracking force of 1.5 to 3.0 grams, the M44-7's rugged construction is highly durable, but will not unduly wear your vinyl.
With a 9.5 mV output, the highest on the market, the M44-7 produces very powerful, resonant sound.

Skip Resistance: ultra high
Output: ultra high
Record Wear: ultra low
Sound Emphasis: big bass
Record Player Systems

Cartridges



Stylus 848Buy Now
$280.67 USD $219.13 EUR $392.00 NZD

STANTON 890SA SCRATCH CARTRIDGE - MATCHED PAIR
A high end performance multi-purpose 890FS pack designed for the scratch artist.
  • 2 Headshell mounted 890 cartridges
  • 2 D-89 SA spherical styli
  • 2 D-89 RM elliptical styli
  • 2 Headshell weights (2g)
  • 1 Stylus mountable brush

  • Record Player Systems

    Cartridges
    Stanton 890FS Twin Cart & Shell pack- includes 4 styli


    Stylus 834Buy Now
    $135.32 USD $105.65 EUR $189.00 NZD

    The Blue and Red models use a four piece OTL cantilever technology, standard oxygen free wire in the coils and Grado's specially designed elliptical diamond mounted on a brass bushing. The Red model is selected from the Blue production run and meet higher test specifications. Approximately 10% of the production run will meet these standards and become Red models.

    Frequency Response 10-55
    Principal MI
    Channel Separation at 1KHz 30
    Imput Load 47K
    Output at 1KHz 5CM/sec. 5mV
    Recommended Tracking Force 1.5
    Stylus Type E
    Inductance 45mH
    Resistance 475
    Compliance CUs 20
    Stylus Replacement U=user U
    Mounting S/P
    Weight 5.5
    Record Player Systems

    Cartridges



    Stylus 838Buy Now
    $185.44 USD $144.78 EUR $259.00 NZD
    Record Player Systems

    Cartridges



    Stylus 847Buy Now
    $143.92 USD $112.36 EUR $201.00 NZD

    The 890 SA is the new high end performance cartridge for the Scratch Artist. With the collaboration of DJ Focus and DJ B-Side, we have improved and re-issued one of the best cartridges from our past. The 890 SA is sure to become a standard in scratch performance.

    The packages includes:
    *1 Headshell mounted 890 cartridge
    *1 D-89 SA spherical styli
    *2 Headshell weights
    *1 Cleaning brush

    Spec's
    Stylus Type: Spherical 0.7 mil
    Super High Polish
    Tracking Force: 2 to 5 grams
    Frequency Response: 20Hz to 20kHz
    Nominal Output: 6.5mV
    Channel Balance: Channel Separation: 30dBDC
    Resistance: 1300 ohms nom.
    Inductance: 970 mh nom.
    Cartridge Weight: 5.7 grams

    Record Player Systems

    Cartridges
    Stanton 890 SA Cart + Shell set


    Stylus 813Buy Now
    $121.00 USD $94.47 EUR $169.00 NZD


    M44G DJ Record Needle, Club/Party, Scratch/Mix/Spin

    Revived exactly the same as the original, this companion to the M44-7 provides an ideal balance between skip resistance and accuracy of sound reproduction for entertainment purposes.

    The M44G is a versatile performance needle, appropriate for both intensive scratching and mixing.

    With a tracking force of 0.75 to 1.5 grams, and a frequency response which is essentially flat from 20 to 20,000 Hz, the M44G produces a vibrant, high-definition sound.
    With the same unique Shure Type S cantilever as used on the M44-7, the M44G is a highly reliable performer, which is also easy on your vinyl.
    Skip Resistance: very high
    Output: high
    Record Wear: very low
    Sound Emphasis: detailed bass and lows Record Player Systems

    Cartridges



    Stylus 835Buy Now
    $128.16 USD $100.06 EUR $179.00 NZD

    The Black and Green models use a three piece OTL cantilever technology, standard oxygen free wire in the coils and Grado's specially designed elliptical diamond mounted in a brass bushing. The Green model is selected from the Black production run and meet higher test specifications. Approximately 15% of the production run will meet these standards and become Green models.

    Frequency Response 10-50 Principal MI. Channel Separation at 1KHz
    Imput Load 47K
    Output at 1KHz 5CM/sec 5mV
    Recommended Tracking Force 1.5
    Stylus Type E
    Inductance 45mH
    Resistance 475
    Compliance CUs 20
    Stylus Replacement U=user U
    Mounting S/P
    Weight 5.5
    Record Player Systems

    Cartridges




    Website © 2002 - 2010 Styli.co.nz including all code, script and images.| Made by Webforce, Hosted by Webforce Hosting.