Styli for Cartridges record players and catridges

The following lists all styli for Cartridges that we stock. You will probally find it easiest to find your stylus by looking at the pictures below. Otherwise you may view the Record Player / System Index or the Cartridge Index for Cartridges.

Stylus N 908Buy Now This VM95 Series cartridge with 0.3 x 0.7 mil elliptical stylus fits half-inch mount turntables. The cartridge’s special coil design delivers a powerful output level of 4.0 mV. It also offers excellent channel separation and low distortion for outstanding tonal quality. The durable, low-resonance housing includes threaded inserts that enable the cartridge to be mounted to the headshell with just two screws – no nuts required. And since all VM95 Series share the same body, the stylus can be replaced with any of the six interchangeable AT-VMN95 replacement styli. VM95 Series dual magnet cartridge with 0.3 x 0.7 mil elliptical stylus Aluminum cantilever Specially wound coils increase output voltage Durable low-resonance polymer housing Compatible with any AT-VMN95 replacement stylus Frequency Response 20-22,000 Hz Channel Separation 20 (dB at 1 kHz) Vertical Tracking Angle 23° Vertical Tracking Force 1.8-2.2 g (2.0 g standard) Stylus Construction Bonded round shank Recommended Load Impedance 47,000 ohms Coil Impedance 3.3 k ohms (1 kHz) DC Resistance 485 ohms Coil Inductance 550 mH (1 kHz) Load Capacitance 100 to 200 pF Output 4.0 mV (1 kHz, 5 cm/sec.) Channel Balance 2.0 dB (1 kHz) Stylus Shape 0.3 x 0.7 mil elliptical Cantilever Aluminum pipe Mount Half-inch Weight 6.1 g (0.22 oz) Dimensions 17.2 mm (0.68") H × 18.9 mm (0.74") W × 28.3 mm (1.20") D Replacement Stylus AT-VMN95E Accessories Included Two 11 mm installation screws, two 8 mm installation screws, two washers Cartridges Record Player Systems

Cartridges Cartridges
Audio Technica cartridge VM95E


Stylus N 910Buy Now The AT81CP allows owners of Technics™, Hitachi™, Pioneer™* and similar linear tracking turntables with T4P plug-in connectors to enjoy the high-fidelity sound that only Audio-Technica can offer. Also suitable replacement for discontinued cartridges: AT3472P, AT3482P, EPC310MC, EPC-P24, SL10 and SL15. Designed specifically for the linear format, the AT81CP features Audio-Technica’s unique dual moving magnet construction. The dual magnet system is combined with the para-toroidal coil construction to assure an excellent sonic clarity and wide channel separation. Specifications: Type: Dual Magnet Mounting: P-Mount Frequency Response: 20 - 20,000Hz Channel Separation: 18dB at 1kHz Output Channe Balance: 2.5dB Output Voltage: 3.5mV (mV at 1kHz, 5cm/sec) Vertical Tracking Angle: 20o Vertical Tracking Force Range: 1.0 -1.5g Stylus Shape: Conical Stylus Size: 0.6mil Stylus Construction: Bonded Round Shank Cantilever: Carbon Fibre Reinforced ABS Coil Inductance: 400mH (1kHz) Recommended Load Impedance: 47KΩ Recomended Load Capitance: 100 - 200pF Weight: 6.0g Dimensions: H10.0 x W15.3 x D35.1mm Replacement Stylus: ATN81CP Catalogue Ref: AU-AT81CP Cartridges Record Player Systems
Audio-Technica: AT81CP P-Mount
Cartridges Cartridges



Stylus N 904Buy Now Audio Technica Replacement MM-cartridge AT-3600L Universal Moving Magnet Cartridge + Stylus Diamond Tip for vinyl record players. Please note this model does not come with mounting screws. Replacement cartridge with stylus High-quality diamond tip Easy to install Robust housing for reliable, long lasting performance Fixing: Standard, two screws Tracking Pressure: 1,5 - 3 gram Output: 5.3mV Frequency range: 20-20.000Hz Specifications Dimensions (L x W x H) 20 x 15 x 15mm Cartridges Record Player Systems
ATN91
Cartridges Cartridges



Stylus N 903Buy Now The AT-VM95EN, features a Nude Elliptical Diamond. The construction of the stylus being a one piece diamond with a round shank inserted in the cantilever creates a lighter and more rigid transmission system than a diamond tip bonded on a round titanium shank such as in the AT-VM95E. Also the use of nude diamond implies a substantial difference in pricing, yet the quality of the reproduction will be immediately noticed, specifically in the fidelity of high frequencies and in the quality of the transient responses. Specifications: Model: AT-VM95EN Type: Dual Magnet Mounting: ½" centres Frequency Response: 20 - 23,000Hz Channel Separation: 22dB (at 1kHz) Output Channel Balance: 2.0dB Output Voltage: 3.5mV (mV at 1kHz, 5cm/sec) Vertical Tracking Angle: 23o Vertical Tracking Force Range: 1.8 - 2.2g (standard 2.0g) Stylus Shape: Elliptical Stylus Size: 0.3mil x 0.7 mil Stylus Construction: Nude Round Shank Cantilever: Aluminium Pipe Coil Impedance: 3.3 KΩ (1 kHz) Coil Inductance: 550mH (1kHz) DC Resistance: 485Ω Static Compliance: 20 x 10-6cm/dyne Dynamic Compliance: 7 x 10-6cm/dyne (100Hz) Wire used for Coil: T.P. Copper Recommended Load Impedance: 47 KΩ Recomended Load Capitance: 100 - 200pF Weight: 6.1g Dimensions: H17.2 x W18.9 x D28.3mm Replacement Stylus: AT-VMN95EN Cartridges Record Player Systems
Audio Technica VM95EN
Cartridges Cartridges



Stylus N 905Buy Now This VM95 Series cartridge with 0.6 mil conical stylus fits half-inch mount turntables. The cartridge’s special coil design delivers a powerful output level of 4.0 mV. It also offers excellent channel separation and low distortion for outstanding tonal quality. The durable, low-resonance housing includes threaded inserts that enable the cartridge to be mounted to the headshell with just two screws – no nuts required. And since all VM95 Series share the same body, the stylus can be replaced with any of the six interchangeable AT-VMN95 replacement styli. VM95 Series dual magnet cartridge with 0.6 mil conical stylus Aluminum cantilever Specially wound coils increase output voltage Durable low-resonance polymer housing Threaded inserts in cartridge body enable cartridge to be mounted to headshell with just two screws – no nuts required Compatible with any AT-VMN95 replacement stylus Frequency Response 20-20,000 Hz Channel Separation 18 (dB at 1 kHz) Vertical Tracking Angle 23° Vertical Tracking Force 1.8-2.2 g (2.0 g standard) Stylus Construction Bonded round shank Recommended Load Impedance 47,000 ohms Coil Impedance 3.3 k ohms (1 kHz) DC Resistance 485 ohms Coil Inductance 550 mH (1 kHz) Load Capacitance 100 to 200 pF Output 4.0 mV (1 kHz, 5 cm/sec.) Channel Balance 2.5 dB (1 kHz) Stylus Shape 0.6 mil conical Cantilever Aluminum pipe Mount Half-inch Weight 6.1 g (0.22 oz) Dimensions 17.2 mm (0.68") H × 18.9 mm (0.74") W × 28.3 mm (1.20") D Replacement Stylus AT-VMN95C Accessories Included Two 11 mm installation screws, two 8 mm installation screws, two washers Cartridges Record Player Systems
Audio Technica system VM95C Moving Magnet
Cartridges Cartridges



Stylus N 919Buy Now Specification: Mono Ceramic Cartridge supplied complete with a Mono/78rpm stylus Output: 210mV Playing weight: 3.0 - 5.0g Frequency Response: 50Hz-12kHz N 116 Mono and 78rpm Cartridges Record Player Systems
ERC: 5MB MONO CERAMIC CARTRIDGE
Cartridges Cartridges



Stylus N 901Buy Now Suitable replacement cartridge supplied with one Stereo and one Mono stylus and mounting bracket. Ideal replacement for most Dansette type stereo record players. Front turnover knob markings: S=Stereo 0.5mil, M=Mono 1.0mil. Stereo Ceramic Cartridge Output: 250mV Frequency Response: 30-12,000 c/s Stylus Pressure: 3 - 6 grams Stylus Replacements: N 039 - 0.7mil Stereo/Mono N 038-78 - 2.5mil 78rpm Cartridges Record Player Systems
Ronette 105
Cartridges Cartridges